DRAX is a light and comfortable travel BCD. Its bladder is not so bulky, above all when it is not inflated because it is close to the tank allowing the diver to move easily. DRAX is a recreational BCD with a buoyancy of 15 litres. It has a very comfortable harness, fully-equipped and completely adjustable, while wearing the jacket too.
DRAX is provided of the EASY BALANCE SYSTEM and the ANTI-OVERTURNING SYSTEM to find easily the perfect posture in all conditions.
DRAX is provided with the Audaxpro Technical Modular System (T.M.S.), which allows you to change the BCD standard configuration according to your needs. Thanks to the Audaxpro T.M.S. you can shape, configure and integrate your BCD as you like. For example, you can:
Adapt your jacket to your physical shape
Adapt it according to your dive
Change its components with any other Audaxpro BCDs
Upgrade your equipment with a wide series of accessories
DRAX is a travel BCD with a very comfortable harness. It is fully-equipped and totally adjustable also while wearing it. This feature makes DRAX a ricreational travel BCD with a perfect stability because it allows you to have the right posture underwater enjoying your dive.
The preformed harness is entirely made of cordura 1000 and padded with 2,5 mm. pre-compressed expanded polystyrene. The anatomical shoulder straps are stitched on the harness and have 2 40 mm. nylon d-rings. moreover, the shoulder straps are equipped with the breast belt, adjustable in 2 different positions thanks to the nylon slick-clips. close to the bladder, there is a ht polyester strip vertically placed at the centre of the harness, where 2 stainless steel eyelets are fixed (1 in the higher part and 1 in the lower part). Right and left to the central strip there are 4 rubber eyelets. they allow the tank straps to go through the 4 cuts of the bladder and the eyelets of the harness. On the tank straps, there are 2 non-slip rubber grips. the ventral belt in polyester is stitched on the harness. there are 2 25 mm. stainless steel d-rings and 2 40 mm. stainless steel d-rings to fix some accessories. the harness is equipped with a ht polyester handle to carry the jacket in water or on board. There is an anatomical padding fixed with 2 stainless steel screws. A rectangular 50 mm. nylon ring, centrally placed in the lower part of the harness, fastens the inguinal belt. A stainless steel buckle allows the diver to close the ventral belt.
Audaxpro BCD have been designed to ensure the best performances in every kind of diving immersion. This is only possible because the BCD Audaxpro are built by combining high quality components and fabrics, high technology and skilled Italian craftsmanship.
DRAX is available in 14 different colours. you can choose between black/black, black/red, black/yellow, black/blue, black/white, black/orange, black/fuchsia, black/camouflage, black/grey, black/sky blue, black/fluo yellow, black/fluo pink, black/fluo orange, black/fluo green.
IDRAX is only available with the buoyancy of 15 litres and can only be used with a mono tank configuration. The dump valve is placed in the front part of the bladder (down left) allowing easily the diver to find it.
The outer bladder of this travel bcd is a donut made of cordura 1000. On the other side, the inner bladder is made of textane a/b 210 nylon. If necessary, you can replace the inner bladder thanks to a zip running along the donut. At the centre of the bladder, there is a ht polyester vertical strip where 2 stainless steel eyelets are fix to secure the padding.
Buoyancy: 15 lt.
Maximum Tank Capacity: 15 lt. mono tank
Dump Valve: 1
DRAX is suitable for divers who often travel by plane and always want to have their favourite equipment with them. This Travel BCD can be bought and used only without plates (Soft version), in order to lighten it and facilitate its transport.
Compact and Lightweight
DRAX follows the dir philosophy, whose aim is the optimisation of each components of the jacket. the inflator connection is always placed in the left higher part in order to facilitate its use and to save space. To easily find it, an inflator holder supperts the corrugated hose. The inflator included in this travel BCD has an elbow connection and a 16″ (4o cm.) corrugated hose. The power inflator has 2 non-slip buttons of delrin and an inner mechanism of nickel-plated brass.
Audaxpro allows you to choose among many models of pockets as weight or objects pocket. Choose the one that better matches your BCD.
The standard pocket of this travel bcd are horizontal (20x14x6,5cm.) made of cordura and have a weight capacity of 5 kg. every pocket has only one opening zip in its higher part. You ca use it both as weight or objects holder. You can secure the pocket to the harness through a stainless steel screw and a stainless steel eyelet placed in the back of the pocket. Paying and additional charge, you can assemble other pockets on your jacket choosing among the best for you in the Audaxpro collection.
Not only can you customize your BCD technically, but you can also personalize your buoyancy compensator with the writing you prefer! Audaxpro offers you the chance to embroider your BCD inflator holder.
For example, you can write your name, nickname, acronym, your diver certification number, the didactics, your blood type or any other signs.