ONE 20 is a buoyancy compensator that represents the perfect balance between quality, performance and price.
This buoyancy compensator is provided with an AUDAXPRO Technical Modular System (T.M.S.), which allows changing the BCD standard configuration according to your needs. Thanks to the Audaxpro T.M.S. you can shape, configure and integrate your buoyancy compensator as you like. You can, for example:
Adapt your jacket to your physical shape
Adapt it according to the type of immersion
Change its components with any other Audaxpro BCD ones
Upgrade your equipment with a wide series of accessories
ONE is a buoyancy compensator suitable for divers who practise recreational diving but also want to start and try more challenging immersions. With this purpose the ONE BCD has been created with a very comfortable, well-accessorized and easily adjustable harness (in water as well).
The preformed harness of this great scuba buoyancy compensator is entirely made of cordura 1000 and padded with 2,5-mm pre-compressed expanded polystyrene. It is possible to adjust its height with the 2 stainless steel back buckles placed on its anatomical shoulder straps. The harness and the anatomical shoulder straps are blocked and adjustable through 2 stainless steel back buckles and fixed with Velcro. You can fasten and unfasten the jacket shoulder straps through 2 50-mm nylon fasteners. There are two 50-mm stainless steel D-rings, which are sewn, thus the shoulder straps cannot be adjusted. Moreover, the 2 anatomical shoulder straps have 2 stainless steel little rings each, which help adjusting the breast line. In the part adjacent to the bladder, you can find a HT polyester strip vertically placed at the harness centre, where there are also 3 stainless steel grommets (2 in the higher part and 1 in the lower part). Right and left to the central strip there are 2 other strips divided by steams. These ones are meant to pass through the 4 bladder cuts and through the harness slots fixing the tank. On the big strips of the diving BC, there are 2 non-slip rubber grips for the tank. If needed, you can replace the ventral belt placing 2 rectangular 50-mm nylon rings, which are in the lower part of the harness, at the ventral part level. There are 4 stainless steel D-rings, 2 22-mm and 2 50-mm D-rings to fix the accessories. The harness is equipped with a HT polyester handle to carry the jacket inside water or on board. To make your diving experience more comfortable, this scuba BCD has an anatomical padding with an inner pocket to keep the lift bag or the signal tube. The padding is fixed to the harness with 4 stainless steel screws. A rectangular 50-mm nylon ring, placed centrally in the lower part of the harness, is used to fix the inguinal belt, which can be adjusted through a 50-mm nylon back buckle. A stainless steel back buckle allows closing the ventral belt.
Audaxpro buoyancy compensators have been designed to ensure the best performances in every kind of diving immersion. For this reason, ONE is available in different versions, one for every different need. This is only possible because the BCD Audaxpro are built by combining high technology and skilled Italian craftsmanship.
The buoyancy compensator ONE is available in 8 different colors. You can choose between black, white, blue, red, yellow, orange, fuchsia and camouflage
ONE 20 is a 20 liters buoyancy compensator with 2 overpressure valves.
The outer bladder of this scuba BCD is made of cordura 1000, while the inner bladder is made of TEXTANE A/B 210 nylon. You can replace the buoyancy compensator inner bladder thanks to a zip placed in its higher part. There is a polyester protection for the inner bladder and the zip can be concealed. In the central part of the bladder there are 4 cuts. They are used to remove the plates and lighten the jacket. In the bladder central part there is also a HT polyester strip, which is vertically placed right there, where 3 stainless steel grommets are (1 in the higher and 1 in the lower part). To tighten the 12 latex rings (3×8), there are 12 stainless steel grommets and 2 side big strips. The big strips on the bladder sides have 4 slots and 8 loops (4 per side).
Buoyancy thrusts: 20 lt
Tank maximum capacity: 15 mono-tank or 12+12 bi-tank
Overpressure and rapid-discharge valves: 2
Thanks to the Audaxpro technical modular system, you can set the weight of your scuba buoyancy compensator according to the different equipment you may choose for every immersion. ONE 20 can be bought or used with plates (Plate versions) as well as without them (Soft version). In the Plate version, you can opt for a stainless steel plate and back plate to increase the jacket weight, or for a plate and back plate made of anodized aluminium to diminish it. There is an anatomical back plate padding for this jacket, which ensures you the best diving comfort. The back plate padding has an inner pocket to keep the lift bag or the signal tube.
This special scuba buoyancy compensator can be assembled either with a stainless steel plate (kg. 2,160) and back plate (gr. 690) or with an aluminium plate (gr. 730) and back plate (gr. 230). In the back plate, 2 big back strips are assembled to fix the scuba BCD tank. You can choose between 2 different types of big strips for this diving BC, one for mono (110 cm) and one for bi-tank (150 cm). On the strips there are 2 non-slip rubber grips.
Plate 2,160 Kg
Back Plate 690 gr
Plate 730 gr
Back Plate 230 gr
ONE is a scuba buoyancy compensator designed to make every operation in water easier, so that you only have to concentrate on your immersion and enjoy it. For the same reason, the inflator and the inflator holder have been assembled in an easy way, in order to make the BCD lighter. The inflator of this diving buoyancy compensator is 50-mm long and it has a discharge valve and metal anti-fraying wire. Both have a piston control, a nickel-plated brass inner mechanism and derlin non-slip buttons.
With Audaxpro, you have the opportunity to choose among many pockets models for holding ballast or containing other objects. Choose the one that better matches your ONE.
The pockets of this special diving buoyancy compensator made of cordura 1000 are horizontal (6,5x20x14) and have a weight capacity of 5 kg. Every pocket of this scuba BC has one zip opening in its higher part. You can use it as a ballast holder or as an objects container. A stainless steel screw ensures that the pocket is tightened to the buoyancy compensator harness, passing through a stainless steel grommet placed on the pocket back. It is also possible to assemble other models (optional) on your jacket choosing one among the whole Audaxpro pocket collection with an additional charge.
Not only can you customize your buoyancy compensator technically, but you can also personalize your BCD with the writing you prefer! Audaxpro offers you the chance to embroider your buoyancy compensator inflator holder.
For example, you can write your name, nickname, acronym, your diver certification number, the didactics, your blood type or any other signs…