TRAVEL is a lightweight BCD designed for those divers who often travel by plane and do not want to renounce to Audaxpro high quality and comfort. TRAVEL, with its 12 lively colour options and its 4 bi-colour combinations, is the ideal buoyancy compensator for your holiday. The BCD textile is so delicate that you do not have to wear a diving gear. Morever, you do not need extra space in your suitcase, because you can carry TRAVEL in its own comfortable practical bag.
This Travel BCD is provided with an AUDAXPRO Technical Modular System (T.M.S.), which allows changing the BCD standard configuration according to your needs. Thanks to the Audaxpro T.M.S. you can shape, configure and integrate your BCD as you like. You can, for example:
Adapt your BCD to your physical shape
Adapt it according to the type of immersion
Change its components with any other Audaxpro BCD ones
Upgrade your equipment with a wide series of accessories
TRAVEL is a scuba BCD with a variable structure and a simple functional harness. This BCD is comfortable, safe to wear and adjust in water as well, while wearing it.
The preformed harness of this great scuba BCD is entirely made of polyester, padded with a soft 2,5-mm pre-compressed expanded polystyrene layer. You can fasten and unfasten the buoyancy compensator shoulder straps through 2 40-mm nylon fasteners. The shoulder straps have 2 40-mm nylon D-rings, which are sewn. The breast line of the diving BC is sewn on the harness as well, thus it is not adjustable. In the part adjacent to the bladder, there is a HT polyester strip (vertically placed at the harness centre), where there is also 1 stainless steel grommet serving as a barycentre. Right and left to the central strip there are 2 other strips divided by seams. These seams let the big back strip and the 50-mm little Velcro strap (tightening the tank) pass through the 4 bladder cuts. 1 non-slip rubber grip for the thank is on the big strip. If necessary, you can replace the jacket ventral belt placing 2 rectangular 50-mm nylon rings, which are on the lower part, at the ventral part level. There are 4 nylon D-rings, 2 of 25 mm and 2 of 40 mm to fix some accessories. The harness of this scuba BCD is also equipped with a HT polyester handle to carry the BC in the water or on board. An anatomical plate padding sewn on the harness makes this buoyancy compensator even more comfortable. A rectangular 50-mm nylon ring, placed centrally in the lower part of the harness, is there for fixing the inguinal belt, which can be adjusted through a 50-mm nylon buckle. A 50-mm nylon fastener allows closing the ventral belt of the buoyancy compensator.
Audaxpro BCs have been designed to ensure the best performances in every kind of diving immersion. For this reason, TRAVEL BCD is available in different versions, one for every different need. This is only possible because the Audaxpro buoyancy compensator are built by combining high technology and skilled Italian craftsmanship.
TRAVEL is a BCD with a variable structure and more colour options available on the market. You can colour your immersions, choosing among 12 options and 4 bi-colour combinations!
The TRAVEL BCD is designed for divers who love traveling light but with a perfectly functional performing buoyancy compensator. TRAVEL is only available with one buoyancy thrust, 15 liters with 2 overpressure and rapid-discharge valves. You can exclusively use it with a mono-tank configuration.
The outer bladder of this scuba BCD is made of nylon 210, while the inner bladder is of TEXTANE A/B 210 nylon. If necessary, ou can replace the buoyancy compensator inner bladder thanks to a zip placed in its higher part. The bladder does not have a textile central part but there are 2 50-mm rectangular nylon rings (1 per side) to secure the bladder to the harness. They secure it through 1 big back strip (110 cm) and a little velcro strap (50 mm) that also secures the thank. You can fix the bladder to the jacket harness also with a ventral belt through 4 50-mm nylon rectangular rings (2 per side) placed at the ventral part level. Moreover, there is a stainless steel screw fixing the harness and the bladder. You can secure them passing the screw through the bladder and the harness grommet, which is placed in the higher part. The big side strips of this diving BC are equipped with 6 loops (3 per side) to tighten 6 latex rings (for the adjusting and filling of the bladder).
Buoyancy thrusts: 15 lt
Tank maximum capacity: 15 mono
Overpressure and rapid-discharge valves: 2
TRAVEL is a recreational diving BC suitable for divers who often travel by plane and always want to have their favourite BCD with them. The TRAVEL BC can be bought and used only without plates (Soft version), in order to lighten it and facilitate its transport
Compact and Lightweight
The TRAVEL BCD has been designed to make your diving as easy and pleasant as a holiday would be. Its connection and inflator holder are placed strategically, in order to save space and simplify the use of this buoyancy compensator. The inflator included in the standard equipment has a discharge valve and metal anti-fraying wire. It is 50-cm long, it has a piston control, a nickel-plated brass inner mechanism and derlin non-slip buttons.
With Audaxpro, you have the opportunity to choose among many pockets models for holding ballast and/or containing other objects. Choose the one that better matches your TRAVEL BCD.
The pockets of this special scuba BCD are made of nylon 210. They are horizontal (6,5x20x14 ) and have a weight capacity of 5 kg. Every pocket of this buoyancy compensator has only one zip opening in its higher part, and you can use it either as an object container or as a ballast holder. A stainless steel screw ensures that the pocket is tightened to the BC harness, passing through a stainless steel grommet placed on the pocket back. It is possible to assemble other models (optional) on your BCD choosing one among the whole Audaxpro pocket collection, with an additional charge.
Not only can you customize your BCD technically, but you can also personalize your BCD with the writing you prefer! Audaxpro offers you the chance to embroider your BCD inflator holder.
For example, you can write your name, nickname, acronym, your diver certification number, the didactics, your blood type or any other signs…