Choose your BCD Air Bladder with the suitable buoyancy force
ONE, a BCD Air Bladder with a variable structure, is available with 2 different buoyancy thrusts, so that you can choose the most suitable one for your immersions. You can opt for a 20 or 27 litre to face challenging immersions. In both cases, the BCD Air Bladder ONE has 2 overpressure valves. The outer bladder is made of cordura 1000, while the inner bladder is made of TEXTANE A/B 210 nylon. You can replace the jacket inner bladder thanks to a zip placed in its higher part. There is a polyester protection for the inner bladder and the zip can be concealed. In the central part of the bladder there are 4 cuts. They are used to remove the plates and lighten the jacket. In the bladder central part there is also a HT polyester strip, which is vertically placed right there, where 3 stainless steel grommets are (1 in the higher and 1 in the lower part). To tighten the 12 latex rings (3×8), there are 12 stainless steel grommets and 2 side big strips. The big strips on the bladder sides have 4 slots and 8 loops (4 per side).